Double-sided cloth holster:
(1) Preparation: First make positive feeding devices quit working; followed by the opening of all closed needle tongue; third remove all loose floating yarn, the knitting Jane completely fresh;
(2) sets of cloth work:
(1) via each yarn guide to the yarn introduction needle hook, and pull the syringe centers;
(2) After each of the yarns are penetrating the hook, all the yarn into a bundle, in the sense that each of the yarn tension even under the premise of the yarn bundle knot, and the yarn splicing winding through the rolling machine axis, tied on a cloth roll;
(3) slow (or hand) to move the equipment, check that all the needles are open and the tongue yarn feed situation is normal, with a brush, if necessary, assist eat yarn;
(4) low-speed weave the cloth, the fabric to be long enough, and put on spreading planes, and even through the fabric of the cloth roll cloth machine axis to quickly lower cloth;
(5) When the equipment properly after weaving so actively involved in co yarn feeding devices.
(6) Check the quality of cloth, in case there is no problem, it is normal to boot.
Circular knitting machine, knitting machine parts, knitting equipment http://www.taisong.net
Such double-sided machines, single-sided cloth holster complete.