High-speed knitting machine of the usual maintenance Maintenance:
Knitting machine daily maintenance:
(1) Whether it is the day shift, middle shift or night shift, must be removed and attached to the machine creel fiber fluff (fly), holding knitting knitting machine parts and take-up of clean stretch.
(2) In the shift change, the need to check the positive yarn feeding device, avoid storing yarn blocked Pied, rotation is not flexible, which led Dahenglu other defects appear in the fabric surface.
(3) the class must check the automatic stop device and safety gear shields, if any abnormal phenomenon, immediately repair or replacement.
(4) shift or tour inspection, you must check whether the oil market as well as the entire flow.
Zhou knitting machine maintenance:
(1) do a good job cleaning the yarn feed speed disk, the inner disk accumulated Pied cleaned;
Belt tension (2) Check the transmission is normal and the drive is smooth;
(3) Carefully check the pulling operation of the winding mechanism of love
Knitting machine monthly maintenance:
(1) Remove the triangular seat, remove accumulated Pied.
(2) Check the dust removal means the wind is correct, and clear above the dust.
(3) Clear Pied electrical accessories within the performance review of all electrical accessories, including automatic stop systems, security systems.
1.4 knitting machine six months maintenance:
(1) All of the knitting machine needles and sinkers disassembled, thoroughly cleaned, and check there is no damage, if damaged, and needs to be replaced immediately.
(2) Check the oil line is smooth, clean fuel injection devices;
(3) Clean and inspect the positive type yarn feed mechanism is flexible;
(4) The Pied Piper and grease cleaning and maintenance of the electrical system;
(5) Check the oil collection passage is smooth.
Knitting machine knitting agencies preservation maintenance:
Knitting machine braiding machine is located in the heart of it is directly related to the fabric (fabric, fabric) style and quality, thus weaving mechanism for the preservation and maintenance is essential.
(1) In the normal operation of the knitting machine for some time, we need to clean the needle groove, to prevent contamination with the knitting needle into the fabric, but also can reduce needle dilute Road (also known as needle path) appears;
(2) Check all the needles and sinkers of damage, if there is damaged and must be replaced immediately, if you use the time for a long time, will affect the quality of the fabric, need to be considered to replace all.
(3) Check the dial and needle cylinder groove wall of damage if problems are found, repair or replace immediately.
(4) Check the wear Triangle, and sure it is installed correctly, the screws are locked;
(5) Check and correct the yarn nozzle installation location, if found serious wear and tear, require immediate replacement.
Circular knitting machine, knitting machine accessories http://www.taisong.net